Bronze Gate Valves "U.S."

Class 125 and 150	Screwed-in Bonnet, Threaded Ends
Sizes:	1/4 - 3"
Pressure/Temp Ratings:	Class 125 125 psi Steam @ 406oF 200 psi Non-Shock Cold Water, Oil or Gas Class 150 150 psi steam @ 406oF 300 psi Non-Shock Cold Water, Oil or Gas
Specs:	MSS-SP-80
Class 125 and 150	Union Bonnet, Threaded Ends
Sizes:	1/4 - 3"
Pressure/Temp Ratings:	Class 125 125 psi Saturated Steam 200 psi Non-Shock Cold Water, Oil or Gas Class 150 150 psi Saturated Steam 300 psi Non-Shock Cold Water, Oil or Gas
Specs:	MSS-SP-80
Class 125	Screwed-in Bonnet, Solder Joint Tubing Ends
Sizes:	1/4 - 3"
Pressure/Temp Ratings:	Class 125 125 psi Steam @ 406oF* 200 psi Non-Shock Cold Water, Oil or Gas
Specs:	MSS-SP-80 ANSI B16.18
Bronze O.S. & Y. Gate Valves
Class 150	Bolted Flanged Yoke-Bonnet, Outside Screw Rising Stem, Flanged Ends
Sizes:	4 - 16"
Pressure/Temp Ratings:	Class 125 125 psi Steam @ 406oF 225 psi Non-Shock Cold Water, Oil or Gas
Specs:	Flanged end valves have dimensions in accordance with ANSI B16.24
Bronze Gate Valves "White Star"
Class 200	Union Bonnet, Solder Joint and Silver Braze Tubing Ends
Sizes:	1/4 - 3"
Pressure/Temp Ratings:	Class 200 200 psi Steam @ 550oF* 400 psi Non-Shock Cold Water, Oil or Gas
Specs:	MSS-SP-80 MSS-SP-73 ANSI B16.18
Class 200 and 300	Union Bonnet, Threaded Ends
Sizes:	1/4 - 3"
Pressure/Temp Ratings:	Class 200 200 psi Steam @ 550oF 400 psi Non-Shock Cold Water, Oil or Gas Class 300 300 psi Steam @ 550oF 1/4" - 2" - 1000 psi Non-Shock Cold Water, Oil or Gas 2-1/2" - 3" - 600 psi Non-Shock Cold Water, Oil or Gas
Specs:	MSS-SP-80
Bronze Gate Valves W/Rolled-in Seat Rings "White Star"
Class 200 and 300	Union Bonnet, Threaded Ends
Sizes:	3/8 - 3"
Pressure/Temp Ratings:	Class 200 200 psi Steam @ 550oF 400 psi Non-Shock Cold Water, Oil or Gas Class 300 300 psi Steam @ 550oF 3/8" - 2" - 1000 psi Non-Shock Cold Water, Oil or Gas 2-1/2" & 3" - 600 psi Non-Shock Cold Water, Oil or Gas
Specs:	MSS-SP-80 ANSI B16.18

*This pressure rating applies to the valve bodies. Solder joint valves should NOT be used in services where the temperature of the fluid being handled is higher than the point at which the solder begins to soften.