Class 125	Screwed-in Cap, Solder Joint Tubing Ends
Sizes:	1/4 - 3"
Pressure/Temp Ratings:	125 psi Steam* @ 406oF 200 psi Non-Shock Cold Water, Oil or Gas
Specs:	MSS-SP-80 ANSI B16.18
Bronze "Y" Swing Check Valves
Class 200 & 300	Screwed-in Cap, Threaded Ends
Sizes:	1/4 - 3"
Pressure/Temp Ratings:	Class 200 200 psi Steam @ 550oF 400 psi Non-Shock Cold Water, Oil or Gas Class 300 300 psi Steam @ 550oF 600 psi Non-Shock Cold Water, Oil or Gas
Specs:	MSS-SP-80
Bronze Lift Check Valves "Model Star"
Class 200	Union Cap, Threaded Ends
Sizes:	1/4 - 2"
Pressure/Temp Ratings:	200 psi Steam @ 550oF 400 psi Non-Shock Cold Water, Oil or Gas

*This pressure rating applies to the valve bodies. Solder joint valves should NOT be used in services where the temperature of the fluid being handled is higher than the point at which the solder begins to soften.